Vibrex 2000 / 2000+ Specifications | |
Physical | |
Dimensions | 7.38″H x 7.25″W x 1.81″D (18.75 cm x 18.42 cm x 4.6 cm) |
Weight | 3.5 lbs. (w/o batteries) (nominal) |
Power requirement | 3-6.4 VDC 250mA |
Interfaces | |
Vibration sensor | 2 ea. Velocimeter (19 mV/IPS sensitivity) |
Mag pickup / tach. | 2 ea. Pulse input, magnetic pickup or logic type |
Accessory Power | 4 ea. D-Cell batteries. (Reverse polarity circuit protected and fused) |
Portable Computer or Printer | 1 Serial, RS-232, 9600baud |
Balance Measurements | |
Phase accuracy | ± 5 Minutes or ± 2.5° |
Balance frequency range | 240 to 10,000 RPM (Basic & French) (120 to 30,000 RPM (Plus)) |
Phase resolution | 2 minutes or 1 degree |
Spectrum Analysis (Fmax, RPM) | |
Vibrex™ 2000 Basic | 1,250 – 20,000 |
Vibrex™ 2000 (French) | 3,000 – 24,000 |
Vibrex™ 2000 Plus | 1,200 – 600,000 |
FFT resolution | 400 Lines |
Performance | |
Memory | 1MB |
Accuracy (Basic & French) | ± 5% from 5 Hz to 333 Hz |
Accuracy (Plus) | ± .5dB from 2 Hz to 500 Hz (± 1dB from 501 Hz to 10 Kz) |
Spurious free dynamic range | >60 dB |
Velocimeter input ranges | 0 to 304mV peak (16 ips) |
(Vibrex 2000 Plus) | 0 to 380mV peak (20 ips) |
Velocimeter input sensitivity | 19mV/IPS peak |
Mag p/u, input frequency range | 100 – 50,000 RPM |
Mag p/u RPM accuracy | 0.1% |
Mag p/u, input voltage range | 0.5 to 12 Volts peak nominal (120 Volts peak maximum) |
Environmental | |
Temperature | 0°C to 50°C, or 32°F to 120°F |
EMI susceptibility and radiated emissions standards | |
Industrial Electronic Control Equipment Class | CE certified to: Standard EN50081-2Standard EN50082-2 |
Ground Software | |
Vibrex™ 2000 Download | Included with all models |
Vibrex™ 2000 Plot | Included w/2000 Plus (Optional w/Basic and French models) |